I am new to this site, so I hope I have posted this in the right place!
I have recently built an HTPC based on the Mocaso 320 case, and the hardware assembled into the case pretty easily. (I can provide all the hardware details if anyone is interested.) I decide to install Windows 7 x64.
I have had a number of annoying software problems, probably the worst being the M Play software provided with the case to drive the remote control and the display. The most irritating aspect was a continually flashing display during and following any TV recording. The only way to stop this flashing, short of a reboot, was to halt and restart the M Play executable.
So I was very pleased to find your LCDwriter software, which is undoubtedly a great improvement on M Play. However, there is still one odd problem. I do not get any of the display messages from WMC7 (just the play duration times) until after I have made a TV recording. Once a recording has completed, or been stopped manually, the display starts to register correctly the status of WMC7 (Guide, TV, Photos etc). One can then stop and restart WMC7, and the display continues to work correctly. If I stop and restart LCDWriterhost it returns to the non-working state until a WMC7 TV recording has again been made.
Are you aware of this problem? Do you have a fix or workaround for it?